This is a demo store. No orders will be fulfilled.
AMANA TOOL 47740 RETAINING COLLAR 1/2 SHANK
$5.03
In stock
SKU
34828
4 Wing Cut Out Bits
Use for cutting out undermount bowls, Surell®,
Fountainhead® and other solid surface undermount bowls. For Corian® bowls, must
be used with a Corian® bowl template.
|
--- |
D |
C |
B |
d |
L |
Tool No. |
|
12! |
3 |
7/8 &1 |
3/16 |
1/2 |
3-5/32 |
57165 |
|
12! |
3-5/8 |
1 |
1/4 |
1/2 |
3-9/32 |
57166 |
Warning: Maximum RPM 12! =
12,000
|
Bearing |
Space |
Collar |
Key |
Tool No. |
|
47745, 47747 |
55371 |
47739 |
5002 |
57165 |
|
47749 |
55363 |
47739 |
5002 |
57166 |
Warning: To achieve the best possible results use these
bits with a variable speed router: Minimum horsepower: 2-1/2 Speed: 12,00 RPM or
less
Max RPM Guide for Amana Tool® Router Bits
Do not exceed the
maximum RPM shown for the particular tool you are using.
Max RPM for symmetrical tool only!
No exceda la maxima velocidad (RPM) indicada para cada
herramienta.
Máximo RPM para la herramienta simétrica solamente!
|
Router Bit Dimensions |
Max RPM |
|
2" (Less than 50) |
28,000 |
|
2" - 2-3/8" (50-60mm) |
22,000 |
|
2-3/8" - 2-3/4" (60-70mm) |
19,000 |
|
2-3/4" - 3-1/4" (70-80mm) |
16,000 |
|
3-1/4" - 3-5/8" (80-90mm) |
15,000 |
|
3-5/8" < (90-100mm) |
13,000 |
Note: Please also refer to laser etching on router bit
shank for most updated RPM speed rating.
| Availability | In Stock |
|---|---|
| Manufacturer | AMANA TOOL |
| Manufacturer Sku | 47740 |
