ASTRO PNEUMATIC 7801 7pc. Sensor & Sending Unit Socket Set

Part No.: 7801

7pc. Sensor & Sending Unit Socket Set

Features

·         Oil Pressure Sending Unit Socket

·         " Dr. x 29mm x 90mm - Allows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. - Designed to be used with 1/2" drive tool.

·         Oxygen Sensor Socket 3/8" Dr. x 7/8" (22mm) x 90mm - Designed to remove and install vacuum switches with a 7/8" hex and some oxygen sensors. - Designed to be used with 3/8" drive tool or with a 1" wrench.

·         Injector Socket 1/2" Dr. x 1-1/16" (27mm) x 85mm - Allows the removal and installation of thermal sensor switch on 1973 - 1977 GM vehicles. - Designed to be used with 1/2" drive tool.

·         Vacuum Switch Socket 3/8" Dr. x 7/8" (22mm) x 80mm - Designed to remove and install oxygen sensors in most domestic and many imported vehicles. - Socket designed with slot which allows clearance of wire. - Designed to be used with a 3/8" drive tool or 1" wrench.

·         Oil Pressure Sending Unit Socket 3/8" Dr. 1" & 1-1/16" (27mm) x 74mm - Includes a 1" and 1-1/16" hex which allows the removal of oil pressure sending units. - Special deep design fits switches up to 2-5/8". - Designed to be used with a 3/8" drive tool or 1-1/8" wrench

·         Heated Oxygen Sensor Socket 1/2" Dr. x 7/8" (22mm) x 50mm - Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. - Socket has a double 1/2" drive for easy access.

·         Low Profile Offset Oxygen Sensor Socket 3/8" Dr. x 7/8" (22mm) x 30mm - Low profile design for use in tight spaces. - Designed to be used with 3/8" drive tool.