DREMEL 191 High Speed Cutter

191 High Speed Cutter

Turn your Dremel rotary tool into a powerful high-speed cutter. Made of rugged, long-lasting steel, our high-speed bits are ideal for cutting through wood, plastic and soft metals. Makes shaping, hollowing, grooving, slotting and inlaying simple.

·         1/8-inch bit diameter

·         Turns your favorite rotary tool into a high-speed cutting tool

Features

·         Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes

·         For use in soft metals, plastics and woods

·         Ideal for use on curved surfaces

·         Use the sides of the cutter for effective cutting

User Tips

·         For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.

·         Secure objects to a stable surface while working.

·         Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

·         Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

·         If chattering occurs, increase speed.

Specifications

·         BIT DIAMETER INCH: 1/8"

·         BIT DIAMETER MM: 3.2 mm