GRACO 243103 FLUID PUMP ARMOR 1 QUART

Pump Armor

Graco fluids and protectants keep your equipment in top performing condition and are approved for use in all airless pumps.

Features

·         Graco Pump Armor™ helps to eliminates damage due to corrosion during long-term storage.

·         Fill your pump and leave until you use your sprayer again. Graco Pump Armor is also freeze-

·         proof to -30° F

·         Specially formulated to protect the airless pump during long term storage

·         Virtually eliminates damage due to corrosion

·         Freeze-proof to -30 degrees F

·         Use full strength for maximum corrosion protection

·         Wide-mouth bottle conveniently fits most pump intake tubes - No waste!

·         Minimal evaporation ensures prolonged protection

·         Non-flammable

Easy to use

1.       Completely clean pump with compatible solvent (use warm soapy for waterbase, thinner for solvent base.)

2.       Relieve pressure and open prime valve

3.       Place pump inlet into Pump Armor bottle

4.       Fill fluid section with Pump Armor (cycle pump slowly until you see Pump Armor come out of prime return tube)

5.       Remove hose and cap outlet fitting. Leave Pump Armor bottle under pump inlet to seal the system

6.       Relieve pressure and close prime valve before storage

7.       After storage - thoroughly flush sprayer with water and dispose of Pump Armor in accordance with local regulations.