KLEIN 33524 Insulated Nut Driver Kit, 9-Piece

9-PIECE INSULATED NUT DRIVER SET- 6" SHAFTS

Clearly marked with the official 1000-volt rating symbol. Two layers of insulation provide protection against electric shock. Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Individually tested to exceed standards. Two layers of insulation for protection against electric shock. Cushion-grip handles for greater torque and comfort. Patented Tip-Ident® quickly identifies nut driver and size. Full hollow shafts facilitate work on long bolt applications. Custom US-made tool steel. Set includes 3/16," 1/4" , 5/16" , 11/32" , 3/8" , 7/16" , 1/2" , 9/16" , 5/8". Custom Cordura® case with document pocket.

Specifications:

All dimensions are in inches and (millimeters) except where indicated.

Warning:

·         Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

·         Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.

·         Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

·         Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.

·         Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.