KREG TOOL KHC-RAC Kreg Right Angle Clamp

The KHC-RAC Features:

• Kreg KHC-RAC is a Right Angle Cushion Grip Clamp
• The Kreg Right Angle Clamp holds work pieces at a 90 degree angle
• It has a steel dowel on one arm to fit into the pocket hole and anchoring your work piece against the second work piece to be joined
• An opposite arm has a 180 degree swiveling pad that automatically adjusts to the dimensions of the work piece while you finish the joint by driving a screw into the adjacent pocket hole
• This clamp with a 4-1/2 Inch reach and easy release handle is particularly useful for assembling box joints and joining a cabinet carcass to face frames

Warranty

• 1-Year Warranty

Attaching a face-frame to a cabinet carcass, assembling drawers, shelving and other situations where you need to join workpieces at 90 degree angles is a snap with the Right Angle Clamp. It features a steel pin on one arm that fits snugly into one Pocket-Hole to clamp the pieces together as you drive a screw into an adjacent hole. Using the Right Angle Clamp is like having a helper on hand to hold materials at a perfect 90°.

Clamp Using the Pocket-Hole
The steel pin on one arm of the clamp is shaped to fit snuggly into a Pocket-Hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw in an adjacent Pocket-Hole while the Right Angle Clamp holds the pieces for you.

Swivel Pad
On the arm opposite the pin, this clamp features a pad capable of swiveling to adjust to the dimensions of your material, so you can count on solid clamping without a chance of the joint shifting.

Ultra Wide Reach
Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.

Use Two Clamps
Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining Pocket-Holes.