MAKITA HR4510C 1-3/4" AVT® Rotary Hammer, accepts SDS-MAX bits, 2-mode, var. spd., case

1-3/4" AVT Rotary Hammer; Accepts SDS-MAX Bits

Anti-Vibration Technology for 2X Less Vibration

·         Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs

·         Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity

·         Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs

·         Soft start suppresses start-up reaction for more control and better accuracy

·         Variable speed control dial enables user to match the speed to the application for greater versatility

·         L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced

·         L.E.D. power lights indicate switch failure or cord damage

·         2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications

·         Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds

·         Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling

·         Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

·         Extended life brushes are longer for more work between service intervals and less downtime

·         16 bit angle settings allow the bit to be set at different positions for operating convenience

·         Automatic brush cut-off protects commutator from damage for longer tool life

·         Lock-on slide switch for continuous operation ("Hammering Only" mode)

·         One-touch sliding chuck for quick bit changes

·         Rubberized ergonomic soft grip provides more comfort and control

·         Accepts SDS-MAX bits

INCLUDES:

·         Side Handle (151769-0)

·         D-Handle (417003-1)

·         Depth Gauge (321248-4)

·         Bit Grease (194683-7)

·         Tool Case

Specifications