This is a demo store. No orders will be fulfilled.
TENRYU PR-25580CBN 10" 80T 5/8" ARBOR ATB GRIND CARBIDE BLADE 20 RAKE 0.118 KERF 5870 RPM WOOD VARIOUS MACHINE
$86.70
In stock
SKU
98926
PRO SERIES for
WOOD
TENRYU'S
superior quality line for professional craftsmen
Laser cut, press tempered, individually hammer tensioned, and chrome-plated
bodies bring the cutting edge to the workpiece with unparalleled precision. Fine
grain carbide tips are given the tooth configuration to do the job right. Pro
Series blades are also made to handle non-ferrous metal cutting, plastics, or
solid surface materials. These blades are made to satisfy the most demanding
craftsmen.
EACH BLADE FEATURES:
·
Fully-hardened, expertly-tensioned tool steel
bodies for true and accurate cuts.
·
High-grade, fine grain, C-4 wear-resistant
carbide tips for long life.
·
Fine grit honing of carbide edge for clean,
smooth cuts.
·
Resin bond-filled expansion slots act as built in
dampeners- keeping your cuts quiet and the sawfs
plate vibration-free!
"The cuts were so quiet
and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D
Compare Tenryu's
Chip-Free Performance
TENRYU blades offer chip-free work in melamine and Other laminates. Even on the
bottom of 2-sided laminate.
Comparison results shown here are clear.
(Each cut shown made with 60t/triple chip grind blade)
Reduced vibration results in extended life of tip edge. Note comparison
of standard blade to TENRYU blade.
(After cutting 4.3 miles of particle board)
PRO SERIES for WOOD
|
MODEL # |
DIA. |
TEETH |
ARBOR |
GRIND |
KERF |
RAKE |
APPLICATION |
|
PR-25560CBN |
10" |
60 |
5/8" |
ATB |
.110" |
20 |
Pro Series for wood. A fast and clean cutting blade for table saws. |
|
PR-25560D |
10" |
60 |
5/8" |
TCG |
.110" |
10 |
Triple chip grind for durability. Great woodworking blade. See quote
above. |
|
PR-25580CBN |
10" |
80 |
5/8" |
ATB |
.118" |
20 |
Our popular 80 tooth woodworking Pro Series blade. Better for thinner
materials. |
|
PR-25580D |
10" |
80 |
5/8" |
TCG |
.118" |
10 |
With triple chip grind for endurance. Excellent woodworking blade. |
|
PR-255100AB |
10" |
100 |
5/8" |
ATAFR |
.118" |
15 |
For use in veneers and thin stock. Unparalleled performance. See also
Mel-Pro (page __) for cutting veneer-faced plywood. |
|
PR-30560CBN |
12" |
60 |
1" |
ATB |
.118" |
20 |
Great 12" table saw blade. Positive rake for thick stock. |
|
PR-30580CBN |
12" |
80 |
1" |
ATB |
.118" |
20 |
Fine cut-off on table saws. Positive rake. |
|
PR-305100AB |
12" |
100 |
1" |
ATAFR |
.118" |
15 |
Great for cutting veneer and thin stock on table saws. |
|
PR-305100AB2 |
12" |
100 |
5/8" |
ATAFR |
.118" |
15 |
For use on double miter saws with 5/8" arbor. Woodworking. |
|
PR-35580AB |
14" |
80 |
1" |
ATAFR |
.118" |
15 |
For fine woodworking with your 14" saw. Excellent value. |
|
PR-355100AB |
14" |
100 |
1" |
ATAFR |
.118" |
15 |
For cutting veneers and brittle stock when finest cuts are needed. |
|
PR-380100AB |
15" |
100 |
1" |
ATAFR |
.126" |
15 |
Clean cuts in thick wood materials on 15h
saws. Positive rake. |
|
PR-405100CBN |
16" |
100 |
1" |
ATB |
.126" |
20 |
Super clean cuts in wood on 16" saws; Especially for thin stock. |
| Availability | In Stock |
|---|---|
| Manufacturer | TENRYU |
| Manufacturer Sku | PR-25580CBN |
