WASHINGTON ALLOY CO. 71T-11-035X2 .035 x 2 LB WELING WIRE INNER SHIELD (TW 71T-11 07)

WASHINGTON ALLOY GASLESS WIRE (E71T-GS)

Specifications

·         AWS A5.20 E71T-GS

Shielding Gas

None

Welding Positions

·         All Positions (H, F, VU, OH)

·         DC- Straight Polarity (electrode negative)

Sizes and Packaging

·         .030” (0.8mm) x 2 lb. (0.91 kg) spools, 10 lb. (4.5 kg) spools

·         25 lb. (11.34 kg) spools

·         .035” (0.9mm) x 2 lb. (0.91 kg) spools, 10 lb. (4.5 kg) spools,

·         25 lb. (11.34 kg) spools

·         .045” (1.2mm) x 2 lb. (0.91 kg) spools, 10 lb. (4.5 kg) spools,

·         25 lb. (11.34 kg) spools

·         1/16” (1.6mm) x 25 lb. (11.34 kg) spools

·         5/64” (2.0mm) x 25 lb. (11.34 kg) spools

Standard Pallet Weights

·         10 lb. spools – 2000 lbs., 25 lb. spools: 2100 lbs.

·         2 lb. spools are packaged 20 spools per 40 lb. master carton.

Features

·         No Shielding Gas Needed

·         Single Pass Welding of Thin Gauge Galvanized Steel

·         Excellent for Outdoor Use

·         Smooth Arc – Minimal Spatter

·         DC- Straight Polarity

·         Works Well In Wind

Description

Washington Alloy Gasless Wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

Applications

Washington Alloy Gasless Wire E71T-GS is most popular for the home workshop welder because it works so well on 110 volt machines and can be used on such thin gauge steel. Gasless Wire E71T-GS is used quite extensively in automobile bodyshops for door or body repairs and it is also used for sheet metal duct work on lap and butt joints.

NOTE: As with all self-shielded wires, Washington Alloy Gasless Wire E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.